| Home| Antique Mantle Clocks | Antique Wall Clocks | Unusual Antique Clocks | Bargain Basement Clocks|
| Antique Anniversary Clocks | Cut Clock Glass | Antique Clock Repairs |Contact Us
 Longcase clocks I  Links Page  | Antique Battery  Clocks | Wheel and Pinion Cutting

 

REPAIRING A BEZEL AND FRAME (plus dial) FROM AN EUREKA CLOCK

This Eureka clock had suffered a fall which had cracked the dial and bent the frame.
You can see by the pictures below the state it was in!! never- the- less well worth putting right
The first job to do was to take the clock apart and see the extent of the damage.

 

 

The bent bezel and frame as first seen.

The bent dial frame, even pressure was applied over the frame until it was straight again.  

The straightened frame with no stress marks showing on the cast brass! 

Close up of the damaged dial and bent motion work

 

Overall view of the dial showing the damage

The repaired dial as good as new!!

New contact switches were made for this Eureka, the motion work repaired and a few other little jobs that needed to be done were done-- before the clock was returned to the customer

The new contacts 

The old switch is on the left

 

BACK

| Home| Antique Mantle Clocks | Antique Wall Clocks | Unusual Antique Clocks | Bargain Basement Clocks|
| Antique Anniversary Clocks | Clock of the Month | Antique Clock Repairs|
Contact Us |  | Links Page |  Antique Battery  Clocks |
 Longcase clock|